Level sensor for liquids MIRA+

Overview

Level gauge for liquids MIRA+™ is designed for continuous measurement of level and temperature of liquids in tanks. The level sensor for liquids MIRA +™ is designed for continuous measurement of the level and temperature of various liquids in storage tanks.

Level gauges MIRA+™ can be additionally used for interface level measurement, alarm and notification generation when sub-critical or critical process parameter values are estimated (e.g., for overfilling protection - when level reaches “top fill level” or “alarm level” that was optioned by an operator).

Level sensor has EX protection type “Intrinsically safe electrical circuit” and can be mounted in hazardous areas of classes 0,1,2.

The level gauge is certified and can be used in custody transfer applications.

It is possible to produce equipment upon special requirements of the Customer. Information integration from the level sensor into any automation systems is available to signal subcritical and critical parameter values (e.g. approaching the set upper/lower product level), control interphase level.

Scope

Level gauges can be used for custody transfer, process control, continuous monitoring of various tank farms. Sensors are applicable for the use with the following products:

Level gauges for use in oil and gas industry, refineries
MIRA+ level sensors can be used for custody transfer and monitoring of oil products
Level sensors for industrial applications, production facilities, etc.
Level and temperature sensors for use in food applications
Level sensors for use in chemical and petrochemical industries
Level measurement solutions for use in power industry

Conformance

Level sensor for liquids «MIRA+» meets the requirements:

Technical data

Parameter Value
Level measurement range 0 ... 18 m
Max. measurement error ± 1 mm
Number of temperature measurement points 1 … 7
Process temperature -40 … +85 °С
Max. temperature measurement error
for temparatures -20 … +55°С ±0.5 °С
for temparatures -40 … +85°С ±1.5 °С
Measurement units mm, °С
Output signal, interface Modbus RTU, RS-485
Supply Voltage Range, DC 24 V
Nominal current 35 mА
Supply Voltage DC (Nominal) 13 ... 26.5 V
Current range 30 ... 45 mА
Max power consumption 1.15 W
Explosion-proof marking Ex II 1G Ex ia IIB T4 Ga
Safety-related data in accordance with ATEX Ui = 27.0 V, Ii = 260 mА, Pi = 1.15 W, Ci = 0.36 uF, Li = 50 uH
Cable twisted pair, 0.5 ... 1 mm2
Tank connection Flange, DN>=125 (see drawings for details)
Degree of protection IP67
Materials in contact with product Wetted parts and sealings: Stainless steel AISI 304/321, PTFE (or equivalents)
Max Net weight 20 kg
Permissible lateral load (waveguide) 5 Nm
Ambient temperature (operation), Ta -25 ... +55 °С
Process pressure -0.1 ... 0.1 МPа
Max. relative humidity < 100 %, non-condensing
Operation mode 24/7

Documentation

Certificates

Delivery set (typical)

# Name pcs.
1 Level sensor for liquids MIRA+™ 1
2 Passport 1
3 User Manual 1
4 Software MIRA+™ Desktop 1