Intrinsic safety barriers БИЗоН 2Ex.24.12
BIZoN EX.24.12 is two-channel intrinsic safety barrier with automatic recovery function after tripping is designed to provide intrinsic safety of transducers and equipment installed in hazardous areas.
The “Power” channel is designed protect power supply circuitry for one device with current-loop 0-5 mA / 0-20 mA / 4-20 mA DC, or for one device installed in a hazardous area (up to +24V DC).
The “Signal” channel is designed for protection of signal circuitry of digital interfaces (e.g. RS-485/RS-422) or for protection of circuitry for transmitting discrete signals from equipment with a “dry contact” output, amplitude up to 10V DC.
Intrinsic safety barrier meets the requirements of EN 60079-0:2017 and EN 60079-11:2017, has explosion protection marking EX II (1) G [Ex ia Ga] IIB (designed for installation outside hazardous areas).
Intrinsic safety barrier - is the device that limits the energy supplied to a circuit and protects hazardous areas from excess energy. By limiting energy to a safe level, intrinsically safe circuits prevent the ignition of potentially explosive atmospheres.
The device is used in measurement and process control systems, emergency protection and alarm systems in explosive and/or hazardous areas of oil and gas & petrochemical, metallurgy, power, chemical, food and other industries, where explosive gas mixtures, vapors, other flammable and explosive substances (dust, powder) may be present.
Intrinsic safety barrier БИЗоН 2Ex.24.12 meets the requirements:
- EN 60079-0:201б, EN 60079- 11:2017
|Parameter||Power channel||Signal channel|
|Max supply voltage||25 V||10 V|
|Max supply current||50 mА||40 mА|
|Channel resistance||210 Оhm||190 Оhm|
|Max. external capacitance Co||0.4 uF||3.5 uF|
|Max. external inductance Io||1 mH||4.5 mH|
|Max. output voltage Uo||27 V||12.75 V|
|Max. output current Io||165 mА||90 mА|
|Explosion-proof marking||Ex II (1) G [Ex ia Ga] IIB|
|Conformance||EN 60079-0:201б, EN 60079- 11:2017|
|Degree of protection||IP20|
|Ambient temperature (operation)||-20...+60 °С|
|Relative humidity (operation)||< 80 % (non-condensing)|
|Assembly instructions||35 mm DIN rail mounting|
|Dimensions||111 х 99 х 17.6 mm|
|Connection data||Phoenix Contact; screw connection; conductor cross section: 0.2-2.5 mm2|
Delivery set (typical)
|1||IS Barrier БИЗоН-2Ex-24.12||1|